Hoverboard Battery Pack 25.9V 4Ah 4000mAh
Replacement battery pack for your hoverboard / 2 wheel self balance scooter.
Does your hoverboard turn on only with the charger plugged in?
Does it cut out randomly during use and only turns back on when the charger is plugged in?
Has your hoverboard been in storage for longer than 3 months and now no longer turns on?
If you have answered yes to any of the above then you may just need a new battery!
There are 3 Batteries available in this listing, please open your hoverboard up and check which voltage and Ah you need (remove the phillips screws on one side of the hoverboard).
Ah is the capacity of the battery i.e. the larger the capacity, the longer the hoverboard will work before going flat.
You can upgrade to a higher Ah battery as long as the voltage is the same (for example upgrading from a 36V 2Ah to a 36V 4Ah). Everything will work the same and you can use the same charger.
Just make sure the physical size of the battery will fit inside your board as some boards are slimmer but most classic hoverboards will accept the larger one no problem.
If you have any queries with this please contact us.
Fully CE certified batteries, suitable for most 6.5", 8" , 10" & 8.5" All Terrain hoverboards / 2 Wheel Self Balance Scooters (these do not fit Razor hoverboards).
- Brand: Jetech
- Certification: CE
- Voltage: 25.9v
- Capacity: 4Ah / 4000 mAh
- Power: 103.6Wh
- Charging Voltage: 29.4V/1.5A
- Connector type: XT60 (charging and power combined)
- Dimensions: Width: 84mm / Height: 60mm / Length: 161mm
- Mounting method: Built in mounts, requires x4 self tapped screws
Replacing batteries is a very easy, however if you have any queries or wish to know how to choose the type you need please message us.
This is the lower voltage 25.9v battery for the 24v circuit board systems.
Please double check you need this battery or the higher voltage 36v version (more common).
The label will be on your original battery or/and printed on your circuit boards.
Also if your hoverboard originally came with a 29v battery charger this battery will be the right one.
If you have a 42v battery charger, you will need the 36v battery pack (not this one).